Control and Signal Switch
Showing 1–15 of 190 results
-
Control and Signal Switch
A9A26924 Earth Switch, OF – auxiliary contact Schneider
- This Acti9 iOF electrical auxiliary is an open/close and fault indicating contact.
- It is dedicated to iC60, iC40, iCV40, iID, iID40, iDPN Vigi, iSW-NA, iC60 & iID double terminals.
- The 2 contacts 1 NO + 1NC can report the signalling information of the associated device to the Acti9 Smartlink.
SKU: n/a -
Control and Signal Switch
A9A26927 AUX, SD-trip alarm contact Schneider
- This Acti9 iSD electric auxiliary is a remote fault indicator contact. It is dedicated to iC60, iC40, iCV40, iID, iID40, iDPN Vigi, iSW-NA, iC60 & iID products.
- It comes with 1 changeover contact indicating the position of the associated device.
- It indicates the position of the associated device in the event of electrical fault or action on the tripping auxiliary.
SKU: n/a -
-
-
-
-
Control and Signal Switch
A9E18323 Earth Switch, Blue signal lamp, 110…230 VAC Schneider
- This Acti9 iIL accessory is a single modular pilot light fixed on DIN rail.
- It has at front face a blue LED of 0.3W with a service life of 100000 hours.
- The Us rated supply voltage is 100VAC to 230VAC at a 50/60Hz frequency, or is 110VDC to 130VDC.
SKU: n/a -
Control and Signal Switch
A9E18324 Earth Switch, Yellow signal lamp, 110…230 VAC Schneider
- This Acti9 iIL accessory is a single modular pilot light fixed on DIN rail.
- It has at front face a yelllow LED of 0.3W with a service life of 100000 hours.
- The Us rated supply voltage is 100VAC to 230VAC at a 50/60Hz frequency, or is 110VDC to 130VDC.
SKU: n/a -
Control and Signal Switch
CCT15369 Earth Switch, IC 2000 photocell Schneider
- IC2000 analogue twilight switch Width of 18mm (2 modules of 9mm) Closing and opening of a contact when brightness decreases, or rises above the selected threshold.
- Adjustable brightness threshold: 2 to 2000 lux Delivered with outdoor wall-mounted sensor 1 channel output
SKU: n/a -
Control and Signal Switch
K1B001ULH Cam changeover switch, 1 pole, 12A Schneider
- This Harmony K1 complete cam switch/selector switch has 1 pole (1P). It also has a rating of 12A, a screw clamp mounting mode and a metallic color with black marking.
- It has “2 – 0 – 1” marking to indicate the position of the switch.
SKU: n/a -
-
-
Control and Signal Switch
K1D002ULH Cam changeover switch 2 poles, 12A Schneider
- This K1 2-pole changeover switch is ideal for direct control of simple machines, has a rated voltage of 690V AC and a rated current of 12A.
- It has a square shape and a metallic legend with black marking. It is IP65 and installs with screws.
- Its high IP allows for handling of panel operations in very dusty and wet environments, including outdoors.
SKU: n/a -
-
